水下无线传感器网络的节点精确定位

以无线传感器网络(WSN)水下应用为背景,针对特定的环境要求,提出了一种可实现网络规模升级的分布式无锚点网络节点自定位机制。该定位算法通过距离误差估计和分布式坐标计算方法,有效地减少了由于测量距离误差所带来的坐标计算误差和节点坐标计算所带来的通信开销,有利于网络节点能量的合理使用和大规模的WSN布放。通过试验仿真计算,验证了该定位机制的合理性,为水下WSN应用提供了有力的技术支持。     

反导作战信息流时延模型研究

在现代防空反导作战中,战术弹道导弹的威胁,给防空系统带来了预警时间不足等一些新的问题。为了提高防空系统的反导预警能力,在对反导作战过程和反导预警作战过程进行分析的基础之上,对反导预警信息流程进行了研究。提出了一种边处理-边分发的实时模式,通过对比分析,所提模型缩短了预警信息的传输时间,使作战部队提前预警。     

系统延迟对脱靶量的影响研究

Paul Zarchan在研究一类由二项式传递函数描述的制导律的脱靶量时,提出了一个命题,即这一类制导律的脱靶量随制导时间的变化曲线可由时间常数为1时的那条脱靶量曲线经过时间轴的比例变换得到。证明了这一命题,并将它扩展到系统中存在纯延迟的情况,得到的结果可以很方便地用于研究系统延迟对脱靶量的影响。     

一种基于LMS的时域相干累积算法研究

为了克服低信噪比条件下传统的自适应滤波算法抑制高斯噪声效果差的缺点,提出了基于最小均方(LMS)的时域相干累积新算法。计算机仿真结果表明,该算法具有良好的抑制高斯噪声的性能,对于低信噪比下信号的增强效果明显优于传统的自适应滤波算法。     

谈自给式呼吸器的选用

论述了自给式呼吸器在灾害事故抢险救援中的重要性,分析了三种自给式呼吸器的使用特点和使用注意事项,介绍了三种常用的自给式呼吸器防护时间的确定方法,以及在实际救援作业中合理选用呼吸器应考虑的事项。     

机电系统故障—时间应力的关联分析技术研究

时间应力测量装置技术是一种测量和存储各种应力数据以及对这些数据进行挖掘与分析的技术。简要介绍了时间应力的基本概念及其研究应用的发展历程。在此基础上,提出了基于故障模式、影响及应力分析(FMESA)的时间应力与机电系统故障的定性关联分析方法和基于多元logistic回归的定量关联分析方法。最后,以某型航空地平仪为对象进行了案例研究。案例分析结果表明,文中提出的时间应力与机电系统故障的关联分析方法能分析出影响系统性能的关键应力因素,为机电系统的故障诊断及故障预测提供基础。     

非自伴情形下时滞抛物方程的惯性流形

利用Lyapunov-Perron方法在适当的谱间隙条件和适当小的时滞假设下,证明了一类非自伴算子情形下半线性时滞抛物方程惯性流形的存在性。     

A stochastic model for burn‐in procedures in accelerated environment

Burn‐in procedure is a manufacturing technique that is intended to eliminate early failures of system or product. Burning‐in a component or system means to subject it to a period of use prior to being used in field. Generally, burn‐in is considered expensive and so the length of burn‐in is typically limited. Thus, burn‐in is most often accomplished in an accelerated environment in order to shorten the burn‐in process. A new failure rate model for an accelerated burn‐in procedure, which incorporates the accelerated ageing process induced by the accelerated environmental stress, is proposed. Under a more general assumption on the shape of failure rate function of products, which includes the traditional bathtub‐shaped failure rate function as a special case, upper bounds for optimal burn‐in time will be derived. A numerical example will also be given for illustration. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

Transient analysis of Markov models of fault‐tolerant systems with deferred repair using split regenerative randomization

The (standard) randomization method is an attractive alternative for the transient analysis of continuous time Markov models. The main advantages of the method are numerical stability, well‐controlled computation error, and ability to specify the computation error in advance. However, the fact that the method can be computationally very expensive limits its applicability. In this paper, we develop a new method called split regenerative randomization, which, having the same good properties as standard randomization, can be significantly more efficient. The method covers reliability‐like models with a particular but quite general structure and requires the selection of a subset of states and a regenerative state satisfying some conditions. For a class of continuous time Markov models, model class C₂, including typical failure/repair reliability‐like models with exponential failure and repair time distributions and deferred repair, natural selections are available for both the subset of states and the regenerative state and, for those natural selections, theoretical results are available assessing the efficiency of the method in terms of “visible” model characteristics. Those results can be used to anticipate when the method can be expected to be competitive. We illustrate the application of the method using a large class C₂ model and show that for models in that class the method can indeed be significantly more efficient than previously available randomization‐based methods. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

破片模拟弹侵彻钢板的有限元分析

根据破片模拟弹侵彻钢板的实验研究,采用MSC.Dytran对破片模拟弹侵彻钢板的侵彻过程、侵彻特性、钢板的破坏模式以及弹体的侵彻速度、靶板的侵彻阻力进行了有限元分析,并将分析结果与实验结果进行了比较.分析结果表明,破片模拟弹冲击钢装甲的侵彻过程可大致分为初始接触、弹体侵入、剪切冲塞和穿甲破坏4个阶段.有限元分析的破片模拟弹侵彻特性及靶板破坏模式与实验观测结果有较好的一致性,在靶板破口的正面,与弹体平面凸缘两端接触的部分,变形以剪切为主,而与切削面接触的部分,以挤压变形为主;靶板破口背面为剪切冲塞破坏;有限元模拟的弹体剩余速度与实验结果吻合较好,弹体侵彻过程中弹靶作用界面的速度和侵彻速度近似呈线性变化.有限元分析结果还表明,采用适当的模型,有限元法能较好地模拟破片模拟弹侵彻钢板的侵彻过程、侵彻特性以及钢板的破坏模式.